Heavy Duty C & H Stake Puller

Features:

Steel Jaws and Pins, Strong Steel Tubing Handle, Jaws are reversible, thus doubling the life of the tool. Cuts time and labor costs.

Flexibility- Phenolic Surface Film is suitable for a variety of uses such as concrete shuttering, truck floors, container, shelves, storage rack, and bins.

Durability� High scuff and abrasion resistance of PSF means that panels last longer in all applications.

Chemically Resistant-Withstands continuous contact with dilute acids, alkaline, organic chemicals and many neutral acidic salts which increase panel reuses in concrete shuttering

Exterior use-PSF panel resists severe weather exposure without finishing.

Visual appearance� Helps mask substrate irregularities and gives a solid uniform finish.

Machinability� Machines well during sawing, routing, and drilling. Minimizes veneer tearing and chip.

SAVE-A-TUBE “super seal” will preserve the life of your caulking tube. Guaranteed or your money back. No more throwing out dried up caulking tubes. After initial use, clean the opening thoroughly.  Then simply place the SAVE-A-TUBE seal over the opening by pushing down and twisting the wing nut. Your caulking tube will be as good as new for many uses..

Made in the USA       Patent # 6,824,026

Newell Corner Lock

Patent Pending

Manufactured by C&H Concrete Specialties Co., Inc.

The Newell Corner Lock System is ideal for gang wall systems with 2x4 or 2x6 studs and walers, also works great with bulkheads.

Recommended waler spacing, 2x4 studs 24" o.c or 2x6 studs 32" o.c.

Saves time and material over traditional methods, no more lacing up corners.

By simply driving in the wedge, the corner is locked. And for stripping, the Newell Corner Lock can't be beat for time. Simply drive up the wedge and the corner is released.

It will not only save you time, but is safer than other methods with the ever increasing OSHA regulations.

Wheather your men are working out of man baskets or climbing the wall this system is faster and safer.

In these tight economic times, every dollar saved in labor or materials is money earned, and with fewer jobs to go around, it may mean the difference between winning a bid or not.

"Compatible with heavy duty two fingered waler brackets"

The solution to your problems

Easy Patch provides a quick, easy and effective solution to all your maintenance and repair problems. There is no sealing, mixing or brushing needed, simply peel off the backing paper and press it firmly on to the damaged surface. Easy Patch will bond to almost any clean dry surface such as wood, metal, fiberglass, concrete, glass and most plastics.

Easy Patch is soft and pliable and will mould to virtually any shape. It cures on exposure to UV Light (Daylight) and the typical cure times range from 10 minutes to one hour depending on the intensity of the UV exposure.

Once the product has hardened, it provides a permanent repair as it is heat resistant, tough, and waterproof and can be drilled, sanded and painted if required.
back to top

A range of applications as diverse as the imagination

A Repair material for the Construction Industry:
Drainage Systems
Pipes & Pipe Jointing
Repairs to Tanks - oil, water and chemical
Flat roofs - or as a lead or copper replacement
Damp Proofing
Repairs to Floors/walls/ceilings in food preparation areas and hospitals
Decoration & Design
Purpose made trunking
Repairs to refrigerated rooms
Encapsulating Asbestos
Repairs to Swimming Pools
Anywhere that lead, copper, aluminium or timber is used - in large areas or small
Repairing Equipment & MachineryFarming Applications
Repairs to of Silage pits
Building , Machinery & Equipment repairs
Drainage
Repairs to Tanks
The Arts
Modeling, Sculpture
Film, Theatre & Television props & sets
Design Prototypes
Automotive & Marine
Body Panels & Floor Linings
Crash Repairs
Exhaust Repairs
Hull and superstructure strengthening, repairs and bonding
Waterways
Repairing Canals
Signs
Crash Barriers
Emergency road markings
D.I.Y.
Literally Hundreds of Interior & Exterior uses around the home and garden.
back to top

Technical description

Easy Patch is an ultra violet (UV) light curable Glass Reinforced Polyester (GRP) material, manufactured in sheet form. The matrix of isopthalic resin, e-type glass reinforcement, inert fillers and a photo-initiator is sandwiched between 2 nylon films. A further black UV film provides for handling in daylight.

Easy Patch is a special low styrene formulation polyester which contains approximately one third of the usual two component liquid polyester resins. The nylon films which minimize emissions and facilitate handling and shaping, can be marked out when transferring templates.

When fully cured all styrene emissions cease, unlike conventional resins where emissions continue for a considerable time. Easy Patch minimizes the risk of tainting and containment vessels can be returned to production quickly. Similarly, little heat is generated by Easy Patch whereas the strong exotherm of conventional resins can create problems with shrinkage. Due to the easier and safer handling, high tensile strength, minimal shrinkage, high resistance against UV degradation, Easy Patch is the preferred GRP solution for many organizations.

Easy Patch is manufactured under strictly controlled factory conditions. The resins and fibers used are in compliance with British Standards in respect of water potability, mechanical properties and durability.

Easy Patch is available in three sizes and comes complete with adhesive laminate. Storage is recommended out of direct sunlight below 30degC with a nominal 12 months' storage time.
back to top

Technical data

Easy Patch has been vigorously tested at approved test centers and universities in Scotland, Wales and England and also in North America, Japan and Australia. Easy Patch has also achieved new WRc approval for water potability and has been tested by Thatcham for use in the Automotive repair market.

NEW 2 x 4 End Cap made from sheet metal. Saves on lumber cost and keeps ends of 2 x 4 boards like new. Used for bracing walls. Simply nail or screw the end cap to a 2 x 4 and you're ready for your job.